Put me down as another satisfied customer. If any of you haven't tried one yet you owe it to yourself to do so. I was skeptical at first because I was confident in my method but that thing makes it so much easier.
I have one question though. Why not make the body with graduations just like a micrometer? For instance the .250 body should be marked with .025 graduations so you can go back to a previous setting. By recording the setting on the first chamber you cut with a particular reamer you can reference that and in theory never measure head space again. Just use the previous setting and move the desired amount to get a different headspace. Am I missing something here or would that not be very handy?
I have one question though. Why not make the body with graduations just like a micrometer? For instance the .250 body should be marked with .025 graduations so you can go back to a previous setting. By recording the setting on the first chamber you cut with a particular reamer you can reference that and in theory never measure head space again. Just use the previous setting and move the desired amount to get a different headspace. Am I missing something here or would that not be very handy?