.224" calibre for 1,000
Drags -
Howdy !
After using my .22-35Rem wildcat to get into the 500yd club, I decided to try some shots on paper @ 1,000. While the 510yd groundhog kill was made shooting a 24"
1-14 5-groove SS Hart, for 1,000yd; I'd be shooting .22-35 re-barrelled /
re-chambered w/ a K & P 28" 1-8 SS 5-groove.
I drew a black circle the size of a paper plate on a big piece of cardboard, and used a surveyor's wheel to run the target out to 1,000.
I got " come-ups " from Hornady over-the-phone, after chrono'ing my load.
Shooting w/ a front rest and rear bag from a ricketty card table, and using no wind flags; I put my first 1,000yd shot in the black ! While this is un-impressive to seasoned LR shooters, I was nearly stupefied by the comparative ease of putting a shot into a 10" circle... first-time out ! A 1,000yd kill on groundhog, seemed perfectly plausible !!
I'm not convinced one HAS TO have/shoot a super-huge capacitied' .224" cal case.
My .22-35 1,000yd load was: 75 "A"-Max over 40.5gr AA3100 and FED LR Match primer; for a 3,420fps accuracy load w/ the 28" tube. While my rifle was outfitted w/ Ken Farrell 20MOA scope base, I really did not have to have it. My 1" B & L scope still had enough elevation adjust in it, to not actually require use of a tapered scope base.
My math showed enough ft lb KE @ 1,000 for humane kill on a groundhog.
I didn't get to try the rifle/cartridge combo at an actuaul paper shoot @ 1,000.
( Now shooting a 6mm wildcat of my own design, w/ easier for me to see bullet holes on paper ).
All good fun !
With regards,
.357Mag