Search results

I'm hoping someone skilled in this matter can help. 50/55 grain bullet,Probably one of Barts 52 grain Flat base. Here's what I'm thinking Lapua brass.JGS reamer .247 neck , turn necks to .010. -0- freebore, going to make the neck shoulder junction a .062 (r) as opposed to .125 in hopes of...

The cci 400 has a thinner cup from what I read yesterday. I was up to 29.2 grains with a Barts 68 dominator with the cci 400 . at that point the primers were getting ugly, but no bolt lift issues. 53Degrees/30% Hum. I also noticed ( by micrometer readings ) the case head diameter started to...

10 x -which primer What is the primer of choice for 10x powder. I have tried fed 205, rem 7 1/2 , br-4 and cci 400. CCI 400 seems to be the most accurate.Was wondering what people who shoot this powder may recommend. Thanks

It is a flat bottom action

No luck from Shilen. I'll try Stiller. Thanks

Does anyone know if the BPS action has the same footprint as another more common action? My BPS action screws measure from where the recoil lug touches the action it is 1 inch to the centerline and the next action screw hole is 3 inches from the front screw. overall length of the action body...

Which primers are working with Accurate LT 32. Also please refresh my memory on the location of the lot # on the container . I saw some with a (1) after the date on the bottle . On the same bottle stamped in the plastic is a (2) Thanks for your help. Bruce

Thanks for the correction, I missed that Bruce

I was leaning towards the LT 32 . It surprised me that it was not listed on the equipment list at the supershoot. I guess most of the top shooters have tons of N133 to use up and no worries when it comes to powder supply. Thanks again for your input. Bruce

Yeah, Working on the back up supply myself , Inquiring just in case. Thanks for your help

If I could not get N133 what powders would be the next best selection in a 6 ppc. awile back IMR xbr 8208 was suppose be good. Now its LT-32. Benchmark was also suppose to do ok along with H322. If you could grade them accordingly on a scale of say 1 to 10 with 1 being the best I would...

Would it not be better to use a 14 to 14.5 twist with the shorter non BT bullet made on a .750 or 790 jacket ? Possible solution ! Buy the bullets and calculate the freebore based on the ojive to the base dimension then calculate the twist based on the overall length of the bullet and buy the...

What would be the best bullet jacket length and twist to shoot with this reamer?