Search results

  1. E

    Nardini 1440 E

    Does any body know how short of a barrel you can chamber through the headstock on a Nardini 1440 E with a spider in place of the chuck? Eddie
  2. E

    Brx 8208

    Just got my 8 lbs and its 4798
  3. E

    clausing/colchester 13"

    What are your guys thoughts on this lathe http://clausing-industrial.com/Products/Lathes/Colchester/13gh.htm Looking at 13x40 and 14x40 Have looked at Sharp, Acer, Kent, Victor and many others. My limit on a lathe is going to be $10,000. That limit will include a DRO, 3 jaw set-true chuck...
  4. E

    Two of my favorite guns

    looks like carbon fiber.... the zig zaggy stuff that is :)
  5. E

    Sightron 10-50x 60mm

    I have two sightron 10-50x60 w/ .125dot Personally, I liked them enough to sell my NF 12-42x56 BR Eddie
  6. E

    clear coating stocks

    Thanks for the replies fellas
  7. E

    clear coating stocks

    anybody???
  8. E

    clear coating stocks

    Looking for someone to professionally clear coat a laminated Tracker stock with only 2 to 3 weeks turnaround. I will have the stock in a few weeks and don't mind paying good money for a professional job. Thanks! Eddie
  9. E

    Trigger Over Travel

    I like overtravel for the simple fact that I know my trigger should re-set if it got dirt or whatever in it. I know this is usually never a factor in benchrest but, in a hunting rifle this could make or break a hunting trip. Therefore I adjust all my triggers the same. Eddie
  10. E

    Ws2

    I have been using it for quite a while myself and have been nothing but happy with it. Eddie
  11. E

    Thoughts on New NORMA 6PPC Brass

    Does anybody know when this new PPC brass will be available and who will carry it. Eddie
  12. E

    bbl removal help

    Put a wrap or two of drywall paper around the barrel, this works very well to keep it from slipping.
  13. E

    Kelby 6.5x47

    I'm running 37.5 with one gun and 38.0 in the other. I'm in the lands with almost square marks running CCI 450's and the bullets are coated with tungsten disulfide (danzac). Work up to it to be safe. Let us know how it shoots for you. I have two other buddies that are using this load with the...
  14. E

    Looking for a custom LB/RP action

    Thanks trouble, I got it! Eddie
  15. E

    Kelby 6.5x47

    Make sure you try the 123 scenars and 130 bergers, I think you'll be very pleased. Varget also. Eddie
  16. E

    6br barrel...7.5tw vs 8tw

    Thanks Lou, I have decided to give the 7.5tw a try. I also had a fella on another forum say that he's running berger 115VLD out of a 30" 7.5tw tube at 2870 from his straight 6br and they were doing a little better than the 105 and 107's. Varget will also be my go to powder of choice since I...
  17. E

    Kav is home from Alfganistan!!

    I thank you for your service and keeping us all safe on the homefront. Welcome home!
  18. E

    scope recommendation

    I shot at the South fork World groundhog shoot this year and the first day was 25+ winds, cloudy and rained cats and dogs. Visibility was about as bad is it could get for that time of year. I shot both my 6.5x47 Lapua rifles, one with a Weaver T-36 and the other with a NF BR 12-42x56....for the...
  19. E

    6br barrel...7.5tw vs 8tw

    I've done alot of research and see that almost everybody runs the 8tw but, seems this is just more of a "standard" that has taken over time. I know results speak for themselves but, I know some of you rifle loonies have results that I would love to have. Hopefully chino69 will chime in, because...
  20. E

    6br barrel...7.5tw vs 8tw

    Going to build a straight 6br for 105 to 107 bullets Have a Bartlein 7.5tw MTU contour blank and was wondering if it would be better to off it and get a 8tw...thoughts?? Thanks, Eddie
Back
Top