Search results

G'day Can I say that I am also an Australian having the same types of problems that AussiFlyer is experiencing.I have been in contact with Dan Killough a couple of times laterly, and although he has not been able to help me, or sell me anything because of these export problems, he has responded...

G'day I have a question about barrel tuners on centerfire rifles. I am in the process of getting a rimfire benchrest rifle built for me.My gunsmith and I have agreed on the type and make of tuner we will use. But this has got me thinking.I have a .223 rifle, single shot, new heavy barrel.This...

G'day From a fellow Aussie Brendon could you explain what you mean by frosted line.I know you know alot more about shooting and barrels than me so I'm interested to learn about what you are seeing. Thankyou for your time. harro

G'day Does anyone have experience with light loads in a 243. I am after a load that my 11 year old son can shoot at paper targets out to 150 yrds.I don't want to use cast lead bullets , but was thinking of jacketed 70 -80 grain .I don't care if we are lobbing the bullet out to the target, but I...

G'day Thanks for the rely's. I was just sitting at the computer reading them, and my son walked in and asked what I was doing ,so I told him and he had a read. He turned to me and said, what are you thinking "That 243 is going to be my hunting rifle one day, your not going to change it around...

G'day I have a question to all of you knowledgable centerfire guys. For quite a few years now I have been shooting mainly rimfire at my local club in a very informal local comp.My young son has been shooting with me and this is the main reason I have shot rimfire.I don't come from a range...

G'day Mr Deneen. May I ask what it is about the Anschutz action you like?? You made my day by saying Anschutz action, as that is what I have but I'm interested in your thoughts and preferences Thankyou for your time harro

G'day Thankyou for your replies What I have realised is that I have have been to precise in my initial testing( not moving the weight far enough between tests). I will now move the weight 5 mm between tests and see if I can see a trend happening ,then fine tune it. This I hope will speed up the...

G'day Man for awhile there I thought I had been the cause of a "Good old fashion fist fight". I thank everyone for replying to my questions, and some of the answers have created more questions in my brain. Does anyone know how much movement is created by one full turn of a harrels tuner ,and...

G'day I have been experimenting with a home made tuner on my old Anschutz 54. It is made up from parts that I had lying around ,and so far I have achieved reasonable success with it. But I have a question about the fine tuning of the device. As you can see in the picture the weight is a metal...

G'day I read an article recently in a magazine, where the author put a collar on the muzzle to achieve what your talking about. It was done to a rifle that came from the factory with a bad barrel ( oversize bore and an even bigger swelling of the bore at the muzzle). This was not a benchrest...

G'day I have a question to ask you knowledgeable shooters. I don't want to start up an argument about should I or shouldn't I clean my Anschutz barrel (for the record I don't clean any of my rimfire barrels until I see the accuracy start to drop off). But my question relates to testing...

G'day I would like to start by saying ,"I think we are all a little bit crazy". I have lurked around this Forum for awhile now, and the reason I visit here is to learn and further my knowledge of this wonderful sport of shooting. I believe that in a sport like shooting ,facts ,and results are...

G'day Sorry to bring this thread up , but I have another question to ask Aussie shooters. How difficult is it to import a stock from the USA. Have any of you guys done it?? Does a stock require a permit to import ?? Are there any other problems that you may know of in regards to bringing in a...

G'day Can some of you knowledgeable guys clear up some questions for me. In the recent magazine put out by SSAA Comprehensive Guide to Shooting and Hunting in Australia in the Benchrest chapter . It is stated that in the .22 Rimfire Benchrest, the total maximum weight of rifle including...

G'day Peter Armstrong , can I ask a few questions about the construction of your stocks?? Did you use Balsa as the core, and then cover with Fibreglass?? Do you use a aluminium block ,or pillar bed ?? Do you know of any "How to" sites that may help me. Could you tell me an approx weight of the...

G'day Can I also ask a question?? Is the barrel tapered or straight ?? If it is straight , would moving the forend up and down the barrel have any effect on tuning it??. In other words could the forend be used as a tuner , or does the tuner have to be out near the muzzle to be effective.Sorry...

G'day Thanks to all that have responded, and to everyone else keep them coming. Peter Armstrong I see you are a fellow Australian .Do you have any experience with Geoff Slee stocks someone at my club reccommended him as they have one of his stocks .Hopefully I will get to see it next weekend...

G'day I have tried searching for threads like I have seen on other forums, but haven't had any success. Can anyone help direct me to a thread on here where you guys have posted pictures of your rifles. If there isn't one , how about starting one. The reason I ask is that I am contemplating...

G'day I have been watching this thread with interest because I am thinking of restocking an old Match 54 ( not in the same league as a Turbo I know ), but all that I can afford to play with at the moment. I am interested in the fact that you are going down the path of pinning the rifle to the...