Search results

Ok Thanks Centerfire

Request For us younger shooters does any one have any pictures? Centerrfire

Question I read on the Web that the lab radar not only picks up your shots quite well but others near you on the line. So if you would double with the adjoining bench who's reading do you get? If an adjoining bench shoots first and then you shoot do you get two readings? Centerfire

STP Information from bottle Gee when I bought it they did not have a lot of other options. Another getting older problem. opps From the bottle STP Oil Treatment UPC 7115365148 15 FL OZ (443ml) Centerfire

Here you go When I bought my Pumpkin the lube suggested was as follows: 1 quart of 20w-50w Castrol Synthetic (Castrol Syntec) 15 fl ounces of STP (STP small bottle is 15 oz) Mix well and you have enough forever. Apply to neck ID with a q-tip Remove from neck ID with a q-tip If needed use a...

Here you go I bought my 3" Super Feet April 2015 from bob adams 2919 old 31 n niles, mi 49120 Bob Adams (adams49031@hotmail.com) Good Luck, Let us know if he is still making, Thanks Centerfire

For what it is worth I just received my February copy of the Natchez Shooter Supplies. Page 4, Weaver Scopes, T series XR, Fixed-Power Target Scopes. ( Lower right column bottom of page) 46x48 New Fine Crosshair Matte F01WE849987 REG. $1444.45 SALE $879.99 Checked Bruno's #849985 Matte...

Just an idea Why don't you use water in a pipe? Horizontal-Vertical? I am sure someone might know how long the pipe has to be to stop large bullets. Don't forget to add antifreeze or drain in winter.:rolleyes: Centerfire

Suggest Dayton from Grainger Dayton Model 2Z803D, 115v, 1.3 A, 100 RPM, 1/15HP Centerfire

questions for you What type of firearm are you loading for? Just one or several different ones. What type of bullet are you using? Cast or jacketed? Bullet point style? Are you taper crimping? Centerfire

My Condolences Dear Wilbur, Please accept my condolences. I am very sorry to hear of your loss. Centerfire

Just a suggestion Drop by www.accurateshooter.com and consider the 6mmBR credentials. Just my 2cents worth Centerfire

Reply Here you go.

Reply to your notes Hope this helps.

Just my 2 cents worth First, I did not notice the Manufacturer of the brass you are using. Second, I did not read how many times each piece of brass had been shot/fired/sized. Before getting into the notes below it is imperative that you know the Chamber Neck Diameter. Cerro Safe would be a...

just an idea Bill, going back to your first sentence about the barrel was chambered by a good gunsmith. Why don't you go back to him and have him prepare a custom sizing die to match the chamber he produced? Provide 3 fired cases fired three times. He buys the die you want, maybe a reamer and...

The unit I use I have used the unit from www.guitarcenter.com #1274228076958, pos 107250789 priced $18.19 or $19.99 37.01" to 58.07" I removed the top and inserted my flag rod into the vertical tube. Centerfire

Best wishes Take it easy and be careful. Hope you take care of yourself. Lots of good advice been given here. Always look forward to your testing results, etc. Centerfire

Very Nice Looks great, tell us how it groups later when you have time. Centerfire

Questions 1. what is the action being used 2. what is the firing spring pounds of weight 3. what caliber 4. is the case sized to only allow 0.0005" of case movement (growth) 5. what are you trying to accomplish 6. what brand of primer/size being used 7. At what depth is the primer being seated...