Search results

Is whoever bought them ready to take orders? Thanks Stephen Hall

Does anyone have experience with both of these stocks? I am building a new rifle for 600 and 1000yd competition 600yd will be 6br and 1000yd will be 6.5-284. I have the field narrowed to these two choices and I would appreciate input on the pros and cons of each stock and also the preference for...

screws on the left odd numbered ring in the front 5.800" outside to outside Hope this helps

I have the same machine as Mike and am very pleased with it. It is a very heavy 13" machine. The only issue i had with it was that the spindle bore needed to be reamed so that bushings could be used for bbl alignment vs a spider. This is easily cured Mike may still have the 1.585 shell reamer i...

Which trimmer is better Hoover or Whidden? and why? sbh

thanks Bill Thats what I needed To know.

When tuning for 600 or 1000 yards what would be a good group when shooting at 300 to tune? I am trying to get a 300 win mag to tune and the best i can do is about 1.5" at 300 cant get the vertical out. 190gr berger VLD 12 twist BBL H4831 powder. Have tried different bullets and n560 but not...

thanks for the replies

What is the current powder of choice for 6.5/284 with apprx 140gr bullet?

Im talking about this case where he is trying to get a BBl without sending his action to the smith.

How do you make sure your Cartridge Identification Marking are in the right place?

Will they fit the original aluminum bar and if so how much for the spinners only without the black anodize? Stephen Hall

I think I will go with 28". What contour should I use?

I am planning on building a 6BR for 600 Yards. What bbl length and twist has been proven? What bullet? Thinking of trying a gain twist Bartlein any thoughts or twist rate suggestions. Thanks Stephen Hall

I use 13.5 gr vihtavuori n110 with 158gr speer gold dot in 357. and 6.8gr vihtavuori 3n37 with 125 gr speer gold dot for 38 special

Im glad we got that straight. :D

I could be waaay off but taking a quick stab at it I came up with this based on a 300 win mag load. 3633 ft/lbs energy at muzzle = .001835 hp/hour Time from ignition to bullet exit from muzzle according to quick load .0012 seconds Number of .0012 time slices per hour = 3,000,000 .001835 hp/hr...

Thanks for the reply I have tried RL25 and like everything about it except that it burns very dirty.

What powders have proven most successful in 300 win mag for competition? Hall Express Action 28" Shilen 12 twist Norma or Lapua Brass 190 gr Berger Or Sierra What Speed can be expected? How full is the case? How clean does it burn? Thanks Stephen Hall

Jackie, I bought a used BRD that looks to be in good shape about a year ago and when I put it on the gun the crosshairs are not level when the turrets are straight with the rifle about 30 degrees off. This scope has been Tuckerized and I am going to dill and tap a hole in the end of the coil...