What Rings For Hall Action?

J

Joe Entrekin

New member
I have a RF BR rifle coming with a Hall action & would appreciate recommendations as to which scope rings would work best with this action. Any help would be appreciated, Joe
 
George
Are you sure about the 3/8 dovetail? I was thinking they used an11mm
Don
 
Thanks for the replies. Per Allan Hall the dovetail is 11mm. I have some Burris Signature high rings on an Anschutz with a 36 B & L that I will probably switch to the new rifle, unless y'all can steer me to something better. Allan's rings look nice, but too low for my likes.
 
I just bought a set of offset 11MM dovetail mounts from Allen last weekend. I put em on my Anschutz 11MM dovetail without issue. I had the bench to the left of Allen last weekend. I assume the rifle he was shooting was of his own making and it was obviously an 11MM dovetail. His is the next action on my BIWI list. Oh ya, his website lists the rings/mounts as 11MM. Did you look there?

bob finger
 
Thanks again! Now we're getting somewhere. The offset risers would probably get me where I want to go. The link to the pics shows them well. They look pretty neat & well integrated. Allan's work is always top-notch. I had checked Allan's website & the ring info implied that the dovetail was 11mm, but didn't say that right out. However, Allan replied to an e-mail quickly with that info. I didn't see anything at all about the risers on the website, but they may be something new that hasn't been updated yet. I will contact Allan again.
 
Joe,
I don’t think Allen is big on updating the webpage, I bought mine late 2005.
Peter
 
Joe give Tony Larson a call. He makes a great set of rings that will fit a hall. They are 30mm alloy that come with delrin inserts for a 1" tube and you can switch either tube size. He charges, something loke $60 for them.
 
Hi Joe, You should have ask me. I had hall rings with the raiser blocks on that rifle. The scope was a leupold 45x with a dot.

Joe T
 
You must log in or register to reply here.
Back
Top