C
CHRIS.T
Guest
As you blokes using in the new Turbo actions?,I have Pro shot rods but need a Bore guide.
Regards Chris.
Regards Chris.
Bill: For the short time I had my 2500X action in hand my Turbo guide seemed to fit just fine. Mine came from KSS and is black in color. When the rifle comes back, soon I hope, I'll get the opportunity to try it again. Stiller said that the Turbo guide was appropriate....bob
Bob & Jim,
That's good to know. Hopefully my MWerks Turbo and Swindlehurst guides will fit my 2500X.
Thanks,
Landy
Landy, I know the MWerks turbo guide is not a good fit. Let us know if the Swindlehurst MWerks guides fit well.
Landy, I know the MWerks turbo guide is not a good fit. Let us know if the Swindlehurst MWerks guides fit well.
I was told the same thing Jim, but you'll find that the bolt raceway of the Stiller is larger than the Turbo. My Turbo bore guides are tight in my Turbo but in the Stiller there is too much movement as they are undersized. I can't see how any Turbo guide would be different. I did get an email back from SPF and was told that they had heard that Lucas has made some up for the 2500X. They did not tell me that any other guide would fit; not that there necessarily isn't one, they just may not know it.
A 40X based guide will work if the diameter is near 0.700 The hole is 0.703. None of the center lockup actions guides will have a groove to grab the bolt stop though. I used a 40X guide and put a groove to match the stop myself. Without the groove it still works fine.