Trigger hanger

H

Halldor Nik

Guest
How much gap/slack between the trigger and trigger hanger is acceptable?? :confused:

Thanks....

regards
Halldor
 
Are you asking about how much clearance between the sides of the trigger housing and the hanger? If so, the best would be as close as possible without binding the trigger workings. How much should be maximum gap? Could be quite a bit as long as the retainer pins fit snugly. i.e. If it works as desired, safely, and consistently use it.
 
I know what rifle you are talking About, The Hall "S" that you recently purchased. I have absolutely no background with a Hall of any kind. I just haven't had them. As for trigger hangers, All Mine have been on Bats, Kelblys, and Vipers or Rattlers. In each case as I slid a jewell into the hanger it was snug, the pins lined up exact, and then when mounting the hanger into the reciever that fit well, like a glove as well.

Remember... if it doesn't fit you must acquit!

Paul
 
Thanks for the replies guys!

Thats right Paul...... I´m talking about the Hall S.
I was just wondering, some wants to have some clearance between the trigger house and the hanger as I´m told :confused:
The trigger on the Hall S works as super even thou it has some gap and it looks promising ;)

regards
Halldor
 
Halldor Nik said:
Thanks for the replies guys!

Thats right Paul...... I´m talking about the Hall S.
I was just wondering, some wants to have some clearance between the trigger house and the hanger as I´m told :confused:
The trigger on the Hall S works as super even thou it has some gap and it looks promising ;)

regards
Halldor
Click to expand...

Halldor,

When I can get back to my rifles, I will measure the gap on all 3 Halls I have. They all have some gap, not an intimate fit.

David
 
You must log in or register to reply here.
Back
Top