Any suggestions on torque settings on a pillar bedded rimfire 22 with a wood stock ?
B bigh Member Apr 16, 2020 #1 Any suggestions on torque settings on a pillar bedded rimfire 22 with a wood stock ?
T tim Well-known member Apr 16, 2020 #2 bigh said: Any suggestions on torque settings on a pillar bedded rimfire 22 with a wood stock ? Click to expand... 25-30 in lbs., although these days 1/2 the guys out there don't even bother any more......moderately tight...done, on a properly bedded gun.
bigh said: Any suggestions on torque settings on a pillar bedded rimfire 22 with a wood stock ? Click to expand... 25-30 in lbs., although these days 1/2 the guys out there don't even bother any more......moderately tight...done, on a properly bedded gun.
T tonykharper Well-known member Apr 16, 2020 #3 bigh said: Any suggestions on torque settings on a pillar bedded rimfire 22 with a wood stock ? Click to expand... Tim is right. 28 inch lbs has been the standard. But it really depends on how it feels when you turn the screws. If you turn them and come up against a hard stop. You are there, but if you feel any mushiness as they begin to tighten you have a problem. TKH
bigh said: Any suggestions on torque settings on a pillar bedded rimfire 22 with a wood stock ? Click to expand... Tim is right. 28 inch lbs has been the standard. But it really depends on how it feels when you turn the screws. If you turn them and come up against a hard stop. You are there, but if you feel any mushiness as they begin to tighten you have a problem. TKH
