R
RHM43
Guest
What do or would you use for a bore guide for cleaning ? Have looked in most likely places and no joy. Also it is in .243 cal.
Thanks
Thanks
C
caroby
Guest
.870 diam bore guide
That large bolt body is unique in the sporting rifle arena...
A shooting counterpart I know has a new Icon (a NICE rifle btw) and uses a
Hall action delrin bore guide. The diameter of the Hall bore guide is .870.
Link to Sinclair.... Scroll down to the Hall (.870 diam) bore guides
http://www.sinclairintl.com/cgi-bin/category.cgi?category=CPCRGSR&item=RG2X&type=store
Though, measure your bolt diameter to make sure diam... If not "close" to .870, then the will make you a custom bore guide.
The Icon is a real gem!
cale
That large bolt body is unique in the sporting rifle arena...
A shooting counterpart I know has a new Icon (a NICE rifle btw) and uses a
Hall action delrin bore guide. The diameter of the Hall bore guide is .870.
Link to Sinclair.... Scroll down to the Hall (.870 diam) bore guides
http://www.sinclairintl.com/cgi-bin/category.cgi?category=CPCRGSR&item=RG2X&type=store
Though, measure your bolt diameter to make sure diam... If not "close" to .870, then the will make you a custom bore guide.
The Icon is a real gem!
cale
Y
Yote
Guest
Not to hijack the thread, but how does that Icon perform? I've read a few articles on them and handled one down at the gun store. It felt good but the trigger was very rough with miles of creep. I'm sure that could be adjusted out though.
R
RHM43
Guest
The Icon by T/C is a will made rifle that is will finished. It is good on target for a hunting rifle. The trigger is crisp and clean with no creep, though it dose not adjust low enough for ME.... I do a fair amount of bench rest, so I have a liken' for a light trigger pull. I have the trigger adj. to 3 lbs. as low as it will go with out work. All in all I like it.
S
