suhl 150 trigger travel

[17 cal]

I have the link explaining all about this trigger but for the life of me i cant seem to get this travel out of the trigger. Can anyone help me out i would appreciate it thanks.

 

[tony q.c.i.s.]

Screw 1:
adjustment of the way of the let-off point.
(Convenient adjusted from the manufacturer)

Screw 2
by turning to the left decreasing of the trigger weight,
by turning to the right increasing of the trigger weight
(adjustment range/sector 200p = 200g = 3086 grains to 600 p = 600g =
9259 grains)

Screw 3
adjustment (horizontal) of the trigger leaf

Screw 4
by turning to the left increasing of first stage weight,
by turning to the right decreasing of the first stage weight

Screw 5
by turning to the left increasing/ extension of trigger slack,
by turning to the right decreasing/ shortening of trigger slack

 

[17 cal]

I have turned the number 5 screw all the way to the right and it finally just doesnt fire, any other ideas. I am assuming that turning to the right is clock wise.

 

[brad541thb]

Turn screw 4 and 5 the same a little bit to the right(clockwise) each time and keep testing it. I took out screw 2 completely. It will help it go down slightly lighter so it is said, and I believe it does help a little. Mine was set on 1.5oz according to Gary Lemons who had a trigger scale. I bumped it back up to 2oz.

 

[Rem 37]

suhl

Mine was the same when I bought it. The back side of the trigger lever is probably broken. Found a guy that orders parts and have 2 of these on the way. Email me at dgusler@ncoat.com for contact info.