Source of individual Hornady headspace and comparitor sleeves

B

Boyd Allen

Active member
In a previous discussion, it was mentioned that the headspace sleeves were not available individually. From many of the usual sources, this is correct, but Brunos has both, as individual parts, as well as blanks for the headspace gauge, for those that want something custom.
(I was on the site, looking for something else.)
 
it would appear with the sale of stoneypoint, the head clearance pcs are sets only..the bullet depth gage are still setperate...from midway.

mike
 
Boyd, excuse a digression on your thread.

Recently, a friend had head separation issues with a .223 of his. Without a proper gauge available on the range, we were able to identify something approaching .010" variation between the shoulder position on his fired cases & an out of the box virgin case miking off a 7 mm neck bushing that was to hand.

It wasn't SAAMI & it wasn't absolute, but it was pretty conclusive what his issue was - he was full sizing his brass.

John
 
Grafs is also a source for individual comparators as well as sets.
 
You must log in or register to reply here.
Back
Top