I'am looking for some information that I can't seem to find here in the U.S. and I'am thinking I might find it from a forum "outside" the U.S. Any forums that I might check out for some info?
Any ideas? Thanks, Mike.
No, I didn't move and don't plan on it either. They'll probably plant me out back when I die.
I'am looking for a "broken shell extractor" for a 6mm/.243 & 22.250 and nobody that I've found has them. I'am thinking that maybe they might be available outside the U.S. by a mfgr. that doesn't ship here. "Baker Jigs & Fixtures" to be exact.
Midway U.S.A. catalog shows them but doesn't stock them anymore and I can't find any contact info for them. I'am still looking.
Almost "everybody" has extractors for the .223, 30.06, .308 but no one, that I have found so far has one for a .243/6mm. I've got 2 or 3 of each and thinking of a modification to one so it would fit a 22 BR or 6BR case. And even a 22.250 would work on a 22BR. .308 base with a 22 or 6mm tip would do the job for both BR cases.
I've chacked Brownell, Sinclair, Midway and quite a few others. Midway lists a "Baker Jigs & Fixtures" extractor that you mix and match pieces to get the caliber your after but they don't handle them anymore. They look like they would be perfect. I'am looking for contact info for them thinking they might be sold in a different (english speaking) country?
SOMEBODY has to make a "dedicated" extractor for a 6mm/.243 and 22.250!
I'am still looking and I won't give up, at least for a while!
I've got a few posts out there on different forums to see if anybody might have heard of "Baker Jigs & Fixtures. Patience is a virtue.
I don't have a stuck case in the chamber! I'am thinking ahead and am looking for a "dedicated" extractor for a 22 and 6 BR. Somebody has to make one???
