Scope Riser Blocks

[The Long Ranger]

Hi Gang...

I haven't visited the board for a quite a while so let me first say "hi" to a lot of old friends along with the wish that all've been doing just GREAT.

As it turns out, today, I'm trying to help my son, Doug, get set up for the upcoming season and find that we very much need a set of "dual screw" 1/2" (or so) high scope riser blocks of the type that has a Davidson (Kelbly) dovetail cut in the bottom so as to slide onto a Panda action...and, that also has a Davidson dovetail on the top so as to accomodate a set of Kelbly or Jewell style rings. I'm also attaching a photo to better illustrate what I'm hoping to find.

If anyone might know where I might get a set of these blocks, I'd really very much appreciate it if you could email me at the address, below.

Many, many thanks, in advance, and all best wishes to ALL...

Dick
rfheisen@comcast.net

 

[mike kunde]

riser blocks

i would contact leonard baity at baity's custom gunworks. i'll bet he can turn out a fine set of those blocks from his machine shop.
his number is 336-667-8785. wilkesboro, nc

mike kunde

 

[expiper]

how abut a 20 moa rail

Kelblys has em in stok....they raise the scope aprox 3/8" and put a 20 moa tilt on the scope for long range...my guns with them installed can also be zeroed @ 100yds....!!!! Hope this helps...Roger....