Remington International

[Fred J]

Looking for instruction sheet on the Remington International Match 2 OZ trigger. There are three screws on the bottom of trigger. Need to lighten without screwing up the OT and Sear engagement.

 

[Peter Armstrong]

Fred,

I think you’ll find those triggers were made by Hart for Remington.
Front screw, engagement
Middle screw, weight
Rear screw, over travel

Peter

 

[BrianJ]

Rem International

Fred,

It depends on which model International you are referring to. The original triggers were made by Hart for Remington as Peter suggested. Midstream (around 64 or so) Remington changed the design and used the standard 40X/700 housing and some common parts with an altered sear and an added third lever.

The original is adjusted as Peter noted except Remington suggested the middle screw, WOP, be adjusted for positive return to forward position. CCW for lighter pull.

The second style made by Remington or those altered to 2 oz standard triggers are adjusted the same as a common 40-X or 700.

bjm

 

[Peter Armstrong]

Brian,

Your right, but as Fred said the 3 screws are on the bottom, that makes it a Hart trigger.

Peter