RCBS Press Mods for Bullet Making

C

cruisor

New member
I'd like to get a RCBS press setup for making BR bullets. I have a set of dies on order from George Ulrich and would like to set to work on making this press ready to swage bullets. I've seen pictures but from what I understand the ram requires machining as well as the plates on top and bottom of the press.

I was hoping to also locate someone who would make a ram for my old press as it's a model RC and I'd like to be able to restore it when it's done making bullets.

So sure hope I can gather up this information and I truly appreciate those folks who contribute to my quest.

Lee
 
Press mods

cruisor said:
I'd like to get a RCBS press setup for making BR bullets. I have a set of dies on order from George Ulrich and would like to set to work on making this press ready to swage bullets. I've seen pictures but from what I understand the ram requires machining as well as the plates on top and bottom of the press.

I was hoping to also locate someone who would make a ram for my old press as it's a model RC and I'd like to be able to restore it when it's done making bullets.

So sure hope I can gather up this information and I truly appreciate those folks who contribute to my quest.

Lee
Click to expand...

Did you talk with George about getting his kit to modify a Lee Classic Cast press? I’ve got 5 of them from him. Super easy and no machining necessary. I made a plate to mount my presses about 20 degrees from horizontal, the Lee handle is indexable so your still working the handle up and down for leverage. This allows me to point up by placing the jacket inside the die and not having to hold it in the punch. I go years without dinging a BT punch!
 
If you have dies on order with George, see if he'll set you up with his converted Lee Classic Cast presses. I have 5 of them from George and they're outstanding.

Photo_3.jpg


-Lee
www.singleactions.com
 
I can see it's on the far right, I didn't recognize which kind it is, that's why I asked. looks cool, thank you.
 
You must log in or register to reply here.
Back
Top