Range Box Powder measure Stand/Holder

R

ronsroom1

New member
Who makes a measure stand/holder that you can bolt to the corner of a Craftsman Machinist tool box. Saw them somewhere. two pieces of bar stock in a," L " configuration. One screw holds the arm ( Where you mount the measure ) to the bar stock that's bolted to the corner of the box. Remove the screw and arm, close the lid, and away you go. Ron 69rr1@cox.net
 
Call Ron Hoehn or Lester Bruno, both of their phone numbers can be found from the home tab in top navigation bar. Probably either one of them can supply what you want.
 
You must log in or register to reply here.
Back
Top