Rampro firing pin spring

[sadsack]

I need a firing pin spring for a Rampro action that I'm finishing. Can anyone tell me how many coils were on the orginal firing pins. I don't know much about these actions, but this one is about the size of a XP-100. Thanks

 

[nickloy]

Firing pin spring

why not get Rem Mod 7 spring,the 7 is the same as a XP,600,so it should work fine.
Nick Loy

 

[sadsack]

Nick: Thanks for the suggestion, but it's a little shorter than the M-7 even. I do plan on cutting a Remington spring down, and I was hoping to avoid some trial and error time.

 

[Al Nyhus]

These guys are making the new version of the Rampro action. Not sure what changes, if any, have happened with the firing pin setup but you might want to try them first. The actions aren't listed on their website yet. -Al
http://www.wasatchprecisionarms.com/

 

[brian roberts]

You might try.........

an XP-100 spring from Wolff or Brownell's (Rem. factory part)

 

[SGS]

Rampro FP Spring

It took me a few days before I was able to get to the back of my safe and get mine out. I have the STP (Silhuette Target Pistol) model which is the shortest one. The spring has 15 coils and has obviously been cut down from a longer spring. The spring is not as fully compressed in the cocked position as a Remington usually is, so you can probably use a few more coils. These need all the spring power you can get for reliable ignition. It is also a good idea to use Federal primers as some others have a harder cup. These are neat little actions. I paid 475.00 for mine brand new some years ago.

Scott Roeder

 

[sadsack]

Thanks for all the replies. I really appreciate the help.