CYanchycki
Club Coordinator
The Rule Book states on page 13 Section 7:
7. MUZZLE ATTACHMENTS. A muzzle attachment may
be attached to a rifle barrel when used as a tuning device. The
rifle, with the attachment in place, must still meet rifle weight
requirements. Once the command “Commence Firing” is
given by the Range Officer, there shall be NO adjusting of
muzzle attachments at the firing line unless the competitor
removes his/her rifle bolt and remains seated. If a competitor
stands or does not remove his/her rifle bolt prior to adjusting
his/her tuner, he/she will be disqualified.
That makes sense but should there not be some wording that says something to the effect of:
Between the commands "Commence Fire and Cease fire" given by the range officer, there shall be NO adjusting of the muzzle attachments at the firing line unless the etc. etc.
The only time that one needs to remain seated and remove the bolt to adjust the tuner is during the 7 minute relay.
Am I correct in this assumption?
After you are done your relay and are cleaning your rifle or etc, you can adjust your tuner if you wish at your loading bench or while cleaning it. The rifle is safe as we all know your bolt is out.
I looked at the revisions and did not see anything. The reason I ask is this was posed to me in a phone conversation I had a few hours ago.
On another note Page 34 section 10 in safety says:
10. MUZZLE ATTACHMENTS USED AS TUNERS. Once
the command “Commence Firing” is given by the Range
Officer, there shall be NO adjusting of muzzle attachments at
the firing line unless the competitor removes his/her rifle bolt
and remains seated. If a competitor stands or does not
remove his/her rifle bolt prior to adjusting his/her tuner, he/she
will be disqualified.
There is No reference to what I mentioned above either in that section.
Calvin
7. MUZZLE ATTACHMENTS. A muzzle attachment may
be attached to a rifle barrel when used as a tuning device. The
rifle, with the attachment in place, must still meet rifle weight
requirements. Once the command “Commence Firing” is
given by the Range Officer, there shall be NO adjusting of
muzzle attachments at the firing line unless the competitor
removes his/her rifle bolt and remains seated. If a competitor
stands or does not remove his/her rifle bolt prior to adjusting
his/her tuner, he/she will be disqualified.
That makes sense but should there not be some wording that says something to the effect of:
Between the commands "Commence Fire and Cease fire" given by the range officer, there shall be NO adjusting of the muzzle attachments at the firing line unless the etc. etc.
The only time that one needs to remain seated and remove the bolt to adjust the tuner is during the 7 minute relay.
Am I correct in this assumption?
After you are done your relay and are cleaning your rifle or etc, you can adjust your tuner if you wish at your loading bench or while cleaning it. The rifle is safe as we all know your bolt is out.
I looked at the revisions and did not see anything. The reason I ask is this was posed to me in a phone conversation I had a few hours ago.
On another note Page 34 section 10 in safety says:
10. MUZZLE ATTACHMENTS USED AS TUNERS. Once
the command “Commence Firing” is given by the Range
Officer, there shall be NO adjusting of muzzle attachments at
the firing line unless the competitor removes his/her rifle bolt
and remains seated. If a competitor stands or does not
remove his/her rifle bolt prior to adjusting his/her tuner, he/she
will be disqualified.
There is No reference to what I mentioned above either in that section.
Calvin