pix for lynn, blast directors etc....

[alinwa]

Lynn,

I know these were supposed to be put in a post somewhere but they're cool enough for there own post

IF YOU WANT THEM MOVED, I'll repost them in the appropriate place.

Enjoy All.....

al

 

[Lynn]

Muzzlebrake Deflectors

Thanks Alinwa
These two pictures were in response to the muzzlebrake thread on heavyguns.
The deflector in the first picture has staight up stacks but at a match diesel truck tips are added that face forward.The center post is 4 inch diameter steel and has a rod for adjusting its height and tightening it.
In the second picture Ann is shooting a 50 bmg prone without any dust concerns.Her load is 248 grains of VV20N29 and a 800 gr borerider bullet.The muzzlebrake is solid titanium in both pictures.Ann as can be seen is not a large woman and the recoil and concussion are not a problem for her.
You can make the deflectors out of PVC pipe very cheaply to fit any bench.They don't work on a 50 bmg but will hold up well for the small calibers we shoot at 1,000 yards like the 338 Lapua.
Lynn