Parker Hale 1200 Dissassembly ????

[Machinist]

I am doing a glass bedding job on an old Parker Hale in 7mm Mag , i removed the action screws , the barrel and action is loose but somethig is holding the magazine at the front of the trigger gaurd together not allowing the stock to be seperated from the barrel assy , i have read that there is a small set screw by the clip release that has to be removed but i can't seem to find it , anyone out there ran into this problem before ?? and can set me in the rite direction ??

 

[luke wads]

three screws

that modle off parker hale as three screws ! press the mag release and youo'll be able to see it if i rember rightly you''l need a 3/32 allen key

this screw ,screws in in a boss on action just infont of the tirger
have fun

edit you most remove the cross pin that hold in the mag release as it hide the screw when in palce