D
dastevoe
Guest
Hi folks, I'm new to the forum and have my first of many questions (no doubt !!).
I'm building a rifle from scratch and am at the point now of looking for design ideas for the bolt stop. I have a wall thickness of .135" from the outside of action (slab or flat sided) to the inner raceway.
The action is based on a Vic Swindlehurst action,ht s/s,ht 4140 bolt,6mm ppc s/s Maclennan bbl.,plunger type ejector.Stock is laid-up graphite BR style
A good friend is a BR shooter and got me started ,the bbl isn't up to his standard but will do fine for me (for now !!!)
I've made some triggers (a jewel style),and now need the springs, any Ideas ??
Thanks,
Steve
I'm building a rifle from scratch and am at the point now of looking for design ideas for the bolt stop. I have a wall thickness of .135" from the outside of action (slab or flat sided) to the inner raceway.
The action is based on a Vic Swindlehurst action,ht s/s,ht 4140 bolt,6mm ppc s/s Maclennan bbl.,plunger type ejector.Stock is laid-up graphite BR style
A good friend is a BR shooter and got me started ,the bbl isn't up to his standard but will do fine for me (for now !!!)
I've made some triggers (a jewel style),and now need the springs, any Ideas ??
Thanks,
Steve