E
elmer1007
Guest
looking for source for a scope mount riser for the BRNO #4 with 15 mm dovetail. rifle is dated 1958 Thanks for any help.
B
BennieDaBlade
Guest
Hi Elmer,
I have a 75 Mod 2 with the wide dovetail. I bought Warne high 30mm rings but they weren't high enough for the 71mm outside diameter objective of the scope.
I finally found a dovetail to weaver adapter from
http://www.edgar-brothers.co.uk/ORIGINAL_SITE/
The don't list it on their site, but here's a pic they sent me. 37GBP
Specs are as follows;
KOZAP‐30100‐19 CZ 527 Weaver Base 1‐piece Hex Clamp
• Total Length 100mm
• 5 Weaver Slots
• Clamping Surface 20mm both ends
• Gap between clamps 60mm
• Height from top of rifle dovetail to top of base 11mm
• Recoil Stop 5mm wide
• Comes complete with Allen Key Wrench
• Steel construction
There is a recoil lug to suit the 527 on one of the ends, but it's a simple job to slice it off they tell me.
Hope this helps some.
Cheers,
Nigel
I have a 75 Mod 2 with the wide dovetail. I bought Warne high 30mm rings but they weren't high enough for the 71mm outside diameter objective of the scope.
I finally found a dovetail to weaver adapter from
http://www.edgar-brothers.co.uk/ORIGINAL_SITE/
The don't list it on their site, but here's a pic they sent me. 37GBP
Specs are as follows;
KOZAP‐30100‐19 CZ 527 Weaver Base 1‐piece Hex Clamp
• Total Length 100mm
• 5 Weaver Slots
• Clamping Surface 20mm both ends
• Gap between clamps 60mm
• Height from top of rifle dovetail to top of base 11mm
• Recoil Stop 5mm wide
• Comes complete with Allen Key Wrench
• Steel construction
There is a recoil lug to suit the 527 on one of the ends, but it's a simple job to slice it off they tell me.
Hope this helps some.
Cheers,
Nigel