Need help with Winchester 52D trigger adjustment

[srgile]

I am a new member to BRCentral and could use some help in how adjust the trigger on a Winchester 52D.
I am a competitive pistol shooter and am just getting into rifle shooting which will only be on a recreational basis. Picked up a 52D this past weekend at a real good price but I would like to adjust trigger for me. Currently, it is solid and I would like a slight amount of take up and the same with over travel. Right now it breaks right at 1 pound. Can these be taken down to around 5-6 ounces?

Could use some guidance on which screws to tweak to obtain the results I am looking for so any info you guys can provide to a rookie rifle shooter from Iowa would be greatly appreciated.

Sincerely,
Steve

 

[George Atkins]

look here

http://i813.photobucket.com/albums/zz53/Dollar_Bill_2009/52ctrigger-1.gif

This should help you out. These triggers will go down below 10oz,but are not reliable at that weight. I have most of mine set at 12-15 oz.There is a lot of info on rimfire central.
http://www.rimfirecentral.com/forums/forumdisplay.php?f=265

George

 

[srgile]

Help with Winchester 52DTrigger

Thanks George!

 

[xs hedspace]

Don't expect any "take up, or overtravel". These triggers are known for minimal motion. Mine is spooky, because I just hear a click when it releases, no movement, no vibration.

 

[glp]

Start frequenting

rimfirecentral.com

There is a trigger sticky in the Winchester, 52 sub forum.

 

[blades]

They were not named "Micro Motion" for nothing. Properly adjusted there is next to nothing take up wise same on the over travel.