Need 30mm rings for Annie BR50

[Steelringer]

Hello,
Need some help here. Planning to mount a 30mm scope on an Anschutz 2013 BR50 action; the silver one with the 4 action screws. The action is not tapped, only dovetailed. Don't see too many dovetail 30mm rings, let alone high size for 60mm optics. Anyone using 30mm scope? Thanks.

S.

 

[ehkempf]

I would recommebd BKL mounts, I have them on all my rimfires that have dovetails. They fit both 3/8 and 11 mm. They also come in both 1 in and 30 mm.

http://www.bkltech.com/30mm-Scope-Mounts-s/58.htm

Ed

 

[Steelringer]

Thank you very much, Ed.

 

[Halo68]

I have the BKL 30MM Rings on my Annie 54 match, They they lock in the dovetail groove nice and tight.

 

[alan k]

Allen Hall makes nice light weight ones. I have several. Go to home/actions on this web site.

Al Kunard

 

[MIKE SUTTON]

I have to pairs of 30 mm Hall Rings Polished For Sale. My e-mail address is mps7@aol.com.

Mike

 

[Don Stith]

Kelbly will provide their rings to fit the 11 mm dovetail on request.

 

[blades]

With that 60mm front end you might need a set of riser blocks as well for clearance if you just use rings (high ) on the dovetail. BKL has a couple units that have a rail under them those would likely provide enough clearance.

 

[twentytwoguy]

Is the 3/8" BKL what you would use for a Davidson style base?

 

[ehkempf]

Is the 3/8" BKL what you would use for a Davidson style base?

No! The BKL rings will fit a 3/8 or 11 MM dovetail but not a Davidson base. For that you need a Kelby or JJ Precision style ring set.

Ed

 

[jwa]

No! The BKL rings will fit a 3/8 or 11 MM dovetail but not a Davidson base. For that you need a Kelby or JJ Precision style ring set.

Ed

The BKL rings work fine on the Davidson Bases.
Jerry