MVG br stocks

Ammion

Ammion

New member
We designed BR stocks for the following airrifles:

- Theoben Rapid with 500cc bottle (to meet the HV weight limit)
- Theoben Rapid with 280cc bottle (to meet the HV weight limit)
- Rapid Air Weapons TM1000 (to meet the HV weight limit)
- Air Arms EV (to meet the LV weight limit)
- Air Arms MPR / S400 (to meet the LV weight limit)

We started with the Rapid 500cc bottle stock (see attached pictures).

Next up will be the AA MPR / S400 stock and I'll post pictures here when complete.

All our stocks will have a 3" wide fore-end. The fore-end and the part of the stock that rest in the back rest will all be parralel to the barel.

Paul

picture.php

picture.php

picture.php
 
Last edited:
Nice Looking stock

Many of us here have added a quick fill on the end of various Theoben Models and some have had a custom tune that adds a regulator extension that extends the tube such that it would not fit if the end of the stock is closed. I may be interested later depending on price with shipping. I have both the quick fill adaptor and the regulator extension. A quick look it would seem that if the stock at end of the tube was open it would allow for both mods.

Bob Z
Houston Texas
 
AA S400 / MPR Stock

We have a AA S400 MPR complete, so next up is a RAW TM 1000.

Most of the top ranked airrifle benchrest shooters in South Africa do NOT shoot free recoil - so all our stocks are designed to have a cheek piece, grip and butt pad.

Paul

picture.php

picture.php

picture.php
 
BobZ said:
Any idea of approx. cost in dollars inlcluding shipping?

Bob
Click to expand...

Bob, l know shipping is not that much but I'll have to confirm cost. We are trying to get laminate blanks at a better price, atm we are paying USD250 for a laminate blank here in SA.

When we have supplier for these blanks I'll be able to give you approx cost.
 
You must log in or register to reply here.
Back
Top