muzzle brakes
- Thread starter FilippoMo
- Start date
Vibe
22 Epperson Cricket
More importantly, which brakes WILL impare accuracy. Brakes are really the most effective after the bullet leaves the barrel.
M
mike in co
Guest
Fillipo
Its usually not the muzzlebrakes fault if the accuracy isn't good.If you work up your load with the muzzlebrake installed then remove it this can sometimes give you less than desirable results.
You have to work up your load with the brake installed because adding the extra weight is like adding a tuner to your barrel.
The horror stories you read about are from shooters who have a pet load then install a brake and don't upgrade the load.This is common with suppressors as well.
Lynn
Its usually not the muzzlebrakes fault if the accuracy isn't good.If you work up your load with the muzzlebrake installed then remove it this can sometimes give you less than desirable results.
You have to work up your load with the brake installed because adding the extra weight is like adding a tuner to your barrel.
The horror stories you read about are from shooters who have a pet load then install a brake and don't upgrade the load.This is common with suppressors as well.
Lynn
I have to agree..... In the thread a couple of months ago about the rule change allowing MB's to be used in HG......it was stated more than once that installing a break on a HG will hurt accuracy. I never quite understood that concept. If it is done right it can't hurt.
Just my .02.