Model 70 and Montana 1999 Tenon

[bea175]

What is the diameter and the usual length of the tenon on the Model 70 and Montana 1999 ?

 

[Bill Leeper]

Both are 1"x16tpi. the MRC is roughly .755 long. The M70 Classic (CRF) or pre-64 is usually around .740 long (coned) and the push feed M70 is around .695 long. I have put a barrel threaded for a pre-64 onto the MRC but some machining was necessary. Regards, Bill.

 

[bea175]

Thanks