Mcmillan edge LV stock question

[Jason Shore]

Has the mcmillan edge lv stock enough room inside it to take a blind adl magazine ?
I have a remington 700 bdl and need to find this out before purchasing the stock.
How much work is involved in converting a action with a bld floor plate to a adl one ?
Any information and help appreciated
Thanks Jason

 

[Randy Perkowski]

Edge Stocks

Jason,
The hunter benchrest guys shooting IBS competition are presently using the hunter version of the same stock. By rule they must have a magazine capable of holding two shells. This sometimes involves cutting a bit of material off the bottom of the sheet metal. It can be done with a bit of care. If I were putting a magazine cut out in a LV, I would pillar bed and screw the action in place. A glue in might get you into some trouble with magazine function.

 

[JerrySharrett]

Has the mcmillan edge lv stock enough room inside it to take a blind adl magazine ?
I have a remington 700 bdl and need to find this out before purchasing the stock.
How much work is involved in converting a action with a bld floor plate to a adl one ?
Any information and help appreciated
Thanks Jason

Contact Kelly McMillan at McMillans. I'll bet he can fix you exactly what you need.

 

[Peter]

Jason, If I'm reading what you wrote correctly....The best you're going to get is a shortened version that wont hold all the rounds of the adl box if you leave anything in the way of a bottom in your cutout,the conversion is just a mag box.