looking for starting load for 30 x 47

O

oldpup223

Guest
I am just getting started with a 30 x 47 and would like to know what some of you have had some luck with. My brass is Winchester 300 Savage with a large primer.

Thanks
 
My rifle has a 1:14 twist and uses the .300 Savage case with the LRP. Two loads that the rifle dotes on are:

37g H4895 --------------------------- This is very mild but is a tackdriver.
CCI BR2
135g Sierra match bullet
W/W brass

40g H4895
BR2
155g Palma
W/W
 
N135 could work well with the 135 sierras. Somewhere around 42 grains. You could also try Winchester 748, for the 135's, somewhere around 42.5 grains. That is a classic 30 x 47 load. I have no experience at the heavier end of the spectrum.
 
I shoot 39gr of VV-133, topped off with a BiB 135, I was really surprised that this shot better than VV-135. Good luck
 
You must log in or register to reply here.
Back
Top