P
pburkott
Guest
Does anyone know where I can get a spare mariner wheel and bearing for my Bald Eagle Slingshot rest. It would make an easier changeover for my windage tops. Thanks...
Pete
Pete
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Bob Griffin
New member
Which type regular threads or the Acme ?
S
steve
Guest
They are like 25.00 from Bald Eagle with out the bearing. The Sinclair wheel will fit the Bald Eagle but has no prevision for the bearing.
Steve
Steve
Butch Lambert
Active member
The threads on Sinclair, Hart, and Bald Eagle are 3/4"x10TPI.
Butch
Butch
P
pburkott
Guest
I sent eMails to Bald Eagle ( bepmachine@aol.com ) and Bill Krazinski at Allied Shooters asking if an extra Slingshot Mariner Wheel was available. Bill responded with a 'No' & I haven't heard from Bald Eagle yet. The post threads are the standard 3/4"x10TPI. I'm still hopeful that an extra mariner wheel and bearing set can be found...even if it's the Bald Eagle ACME QUICK POST & MARINER WHEEL W / Bearings & Race combination that I can mount on my Hoehn "ULTIMATE" Windage adjustable top.
Pete
Pete
Butch Lambert
Active member
I think that Bald Eagle has quit production. Their quick adjust is a rack and pinion. Bald Eagle's mariner wheel works on the 3/4"x10TPI shaft. You can use any 3/4"x10 mariner wheel and cut the bottom of it for a thrust bearing.
Butch
www.shadetreeea.com
Butch
www.shadetreeea.com