R
Ruger44fan
Guest
I have a Kenyon trigger assembly that I would like to know what it fits. I think it is a 700 Remington. Also looking to sell it; was thinking of Gunbroker. Thanks for any help.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Steelhead1
G Vanlier
Carl's forte was in Rimfire triggers, as in the best winchester model 52 triggers, he did work on others I had a BSA Martini, that he reworked for me, and it was nothing short of superb! Gunbroker would be a good place to sell it. Or you could list it here in the classified section! All you gotta do is send Wilbur $3.00 for the add.
B
bob finger
Guest
Karl made triggers mostly for Winchester 52's (he worked for Winchester at one time) Remington 37's Anschutz 54's (rare as hens teeth) and a few for the 40X Remington. The 40X triggers will fit the 700 as it is Remington pattern trigger but the bolt catch needs to be modified as Karl was a believer in a 90 degree catch rather than the angled Remington design. He also modified several factory triggers. Those will most likely not have his "Kenyon" stamp on it.
If you can post a photo we can identify the trigger for you. Kenyon triggers are EXTREMELY valuable. It will amaze you what some of us are willing to pay for one. bob
If you can post a photo we can identify the trigger for you. Kenyon triggers are EXTREMELY valuable. It will amaze you what some of us are willing to pay for one. bob
Butch Lambert
Active member
I just sold a Martini that Karl built. I also have a few barrels that were in his shop when he passed away.