Jewell Trigger "Creep"

J

Joe

New member
One of my Jewell triggers (mounted on a Panda action) has the slightest amount of creep, or slack, just before it goes off.
It does not seem to happen with every shot.
I had the same problem with this trigger in the past and was able to adjust it out.
As I remember , it was a real PITA to get out, and I don't remember how I did
it. (which screws to turn)
Suggestions?
Thanks
Joe Cowan
 
Joe
The screw in the trigger shoe is the weight, the one with the round head is the overtravel and the one at the front is the sear engagement. Adjust the sear engagement screw. Turn it in for less and out for more. You may need to readjust the weight also. Just be sure its safe when your done.
 
You must log in or register to reply here.
Back
Top