Jewel Spring ID?

[Propdoc03]

The two springs that came with my Jewel trigger came in a nice little manila envelope however they are not identified. Is there an easy way to id them without installing and testing?

thanks,
Dennis

 

[Kurt Westfall]

The A spring is around a .025 wire, the B is .015 and the C is .010 or so, they do very some. If you squeeze one between your fore finger and thumb the A can't be compressed, the B you can compress and the C will compress very easey.

 

[Propdoc03]

Thanks Kurt. After taking a closer look at the springs it was quite obvious
I have it dialed in at 2.5oz with the B-Spring. At least thats a starting point. I have never used a Jewel or a trigger this light.

Dennis