Installing Trigger

[Old Timer]

How hard is it to install a trigger assembly on a Rem 700 short action. Are there any special tools needed. Will there be any ballistic saturn-5 springs
flying out, landing somewhere that is impossible to locate.

 

[Dennis Sorensen]

Referring to the 700 factory trigger...
It is very simple to remove... two pins need to be driven out... the rear pin has a spring captured... it won't fly anywhere... just look at how it is before you remove the pins... when the assembly comes out there will be one spring inside that will be loose with the sear.

It is easier to reinstall using two slave pins...

 

[Rflshootr]

Just to add to what Dennis said, if you have a digital camera, you may want to take a picture or 2 before disassembly.