B
BigMacky
Guest
I shot ARA last year and used a Von Ahrens one-piece rest. Rogers rest has the vertical and horizontal adjustment knobs towards the rear of the rest. I was able to move between bulls (sighters or record) quickly and precisely. The range of motion was PLENTY to move anywhere on the card and even way off either side or top or bottom. I emphasize the "precisely" part. Meaning it was easy to move right to the POI that I wanted and I didn't have to reach far forward to do it.
Well this year it looks like I'm gonna be shooting IR 50/50. So it's time for a two-piece rest solution. For me one of the hardest things to do is to decide what "piece of equipment" is "for me" without actually having one to try. I try to think out all of the pros and cons that I think I will find, I ask lots of questions, but in the end I think equipment selection is a real personal thing. What you like, and what I like, may be the same and visa versa.
So ... first off I'm trying to decide between a coaxial front rest or a knob turning front rest. Here's are some of my thoughts/questions.
Coaxial Rest ...
What's it like to move exactly to your desired POA? With knobs I've found that they are very precise and finite and very easy to get that exact POA, I'm concerned that with a coaxial rest I'll find myself moving back and forth and up and down trying to find that exact POA moving all around it and passing over it. What are your experiences?
When you chamber another round does it move where you were aiming? And along those lines, if you adjust the tightness so that it doesn't move, have you now made it harder for precise adjustments?
I'm reading that coaxials have enough horizontal range but not enough vertical range for an IR 50/50 target ... and you have to use a vertical knob, that just like the knob rests you have to reach forward for, how does this affect the convenience of using a coaxial rest?
Knob Turners.
I think my biggest concern with these is that I've never had to reach forward to get to the adjusting knobs. With my 1 piece I could use two hands (if I had to), one on the vertical knob and one on the horizontal knob, and "FLY" precisely to my next POA. It seems that it would be kinda hard to reach forward with two hands to be able to adjust both knobs at the same time and it would not be as fast moving one hand between horizontal and vertical knobs to get to the exact POA. Is it?
That's kinda it .... at least until I think of some more questions based on the answers.
I've read in a couple of posts that the Farley Coaxial people offer a money back gaurantee ... that you can use it for 30 days and you can return it for a refund, no questions asked if you don't like it .... is that true? That might be the way to go.
Either way ... thanks for any help ... I appreciate it ... Fred
Well this year it looks like I'm gonna be shooting IR 50/50. So it's time for a two-piece rest solution. For me one of the hardest things to do is to decide what "piece of equipment" is "for me" without actually having one to try. I try to think out all of the pros and cons that I think I will find, I ask lots of questions, but in the end I think equipment selection is a real personal thing. What you like, and what I like, may be the same and visa versa.
So ... first off I'm trying to decide between a coaxial front rest or a knob turning front rest. Here's are some of my thoughts/questions.
Coaxial Rest ...
What's it like to move exactly to your desired POA? With knobs I've found that they are very precise and finite and very easy to get that exact POA, I'm concerned that with a coaxial rest I'll find myself moving back and forth and up and down trying to find that exact POA moving all around it and passing over it. What are your experiences?
When you chamber another round does it move where you were aiming? And along those lines, if you adjust the tightness so that it doesn't move, have you now made it harder for precise adjustments?
I'm reading that coaxials have enough horizontal range but not enough vertical range for an IR 50/50 target ... and you have to use a vertical knob, that just like the knob rests you have to reach forward for, how does this affect the convenience of using a coaxial rest?
Knob Turners.
I think my biggest concern with these is that I've never had to reach forward to get to the adjusting knobs. With my 1 piece I could use two hands (if I had to), one on the vertical knob and one on the horizontal knob, and "FLY" precisely to my next POA. It seems that it would be kinda hard to reach forward with two hands to be able to adjust both knobs at the same time and it would not be as fast moving one hand between horizontal and vertical knobs to get to the exact POA. Is it?
That's kinda it .... at least until I think of some more questions based on the answers.
I've read in a couple of posts that the Farley Coaxial people offer a money back gaurantee ... that you can use it for 30 days and you can return it for a refund, no questions asked if you don't like it .... is that true? That might be the way to go.
Either way ... thanks for any help ... I appreciate it ... Fred