How many form dies are required to produce 219 Donaldson cases from 30-30 brass?
M martin zuck Member Jun 7, 2020 #1 How many form dies are required to produce 219 Donaldson cases from 30-30 brass?
OliveOil Active member Jun 8, 2020 #2 From "Handloader's manual of cartridge conversions" by Donnelly, 1987, 2 form dies are mentionned. Desciption is : 30-30 Win do not anneal run into form 1 run into form 2 run into F/L die expander removed cut to length I.D. neck ream F/L size chamfer Hope this help.
From "Handloader's manual of cartridge conversions" by Donnelly, 1987, 2 form dies are mentionned. Desciption is : 30-30 Win do not anneal run into form 1 run into form 2 run into F/L die expander removed cut to length I.D. neck ream F/L size chamfer Hope this help.
M martin zuck Member Jun 8, 2020 #3 martin zuck said: How many form dies are required to produce 219 Donaldson cases from 30-30 brass? Click to expand... Thanks for the help.
martin zuck said: How many form dies are required to produce 219 Donaldson cases from 30-30 brass? Click to expand... Thanks for the help.
1 1911Nut Member Jun 9, 2020 #4 Federal did a run of small primer 30-30 brass named 30 American a few years ago, I found about 100 from guys on Accurate Shooters. It shoots smaller than Zipper or any of the 30-30 brass I loaded for my Wasp.
Federal did a run of small primer 30-30 brass named 30 American a few years ago, I found about 100 from guys on Accurate Shooters. It shoots smaller than Zipper or any of the 30-30 brass I loaded for my Wasp.
M MRL New member Jun 11, 2020 #5 Grafs had 25-35 brass. Makes for a whole lot less work making 219 Zippers and you are just going one more step.
Grafs had 25-35 brass. Makes for a whole lot less work making 219 Zippers and you are just going one more step.
