Headspace for 6.5x284 norma

[Akiona]

Anyone knows where I can get a Go/No Go gauge for a 6.5x284 Norma?
284Win.



Thanks - Akiona

 

[Big Al]

Sure, any of the reamer makers that make the reamer, have head space gauges. You only need a go gage a piece of scotch tape over the end of the gage will give you the NO GO.

Go to the home page on this site and click on the reamer or just look for PT&G ad. That is the only one that advertises here. Or do a web search for J&G or Manson, I can't remember the other dozen or so, right off the moment.

 

[Akiona]

Big Al

Thanks. I'll do that.

 

[Chisolm]

If you are in a rush Midway USA shows them in stock.

http://www.midwayusa.com/viewproduct/?productnumber=282515

All of the go gauges I have ordered direct from PTG have taken at least 2 weeks. Yea I know he just doesn't keep the ones I need on the shelf.
According to my 6.5x284 Norma reamer print it uses the same go gauge as the 284 Win.

James

 

[Akiona]

Chisolm

If thats the case, I'll order one today.

Thanks- Akiona

 

[NesikaChad]

David Kiff, owner of Pacific Tool and Gauge.

One stop shopping for all the good stuff.