glue in previously pillar bedded action

[Kodzoff]

BR LV Rifle, McMillan Bruno FG stock. Currently Bat SS 3L action aluminum pillar bedded with additional skim of marine tex. I would like to glue it in to eliminate thinking about action screws and bedding, but I want to be able to get it out with reasonable heat/force maybe someday??? The current bedding is tight, so all I think I need is a thin film epoxy, since there are no voids that need filling, just a good adhesive. Am I right, and if so, which is the best adhesive and what special prep might be recommended to existing marine tex bed and action.

 

[eww1350]

Just curious as to why you would worry about the screws..
I have 2 HV rifles that are screw-ins and I have never had a screw come loose or my rifle shoot badly because of the screws...now on the other hand...I have heard of glued actions coming loose without warning and ruining a shooters day...I say put the screws in and forget about it..glueing is a better way of making weight in the LV class, but not better than a screw-in all else being the correct...if the bedding is done properly your biggest failure will be to read the conditions correctly...don't over anylize the basics..)chill(