Fwb 300

[Larry Wilkins]

Here is the problem, the 300FWB has gone to-blink. The springs holding the valving at the slage have broken into small pieces and jambs the cocking arm.
Now that was the problem, now any advise as to were this may be repaired. We are West coast.
Cheers

 

[Asa Yam]

Larry,

I'd start with Beeman, as they were the original US importers for the FWB 300. Weblink for their repair information is http://www.beeman.com/repair.htm . After that, try either Pilkington's in Massachusetts ( http://www.pilkguns.com/gsmithing.shtml ), or Brenzovich ( http://www.brenzovich.com/ ) in Texas. Hope this helps.

 

[therealld]

Randy Bimrose used to do most all Beeman's target rifle repairs. He still repairs old 10M air rifles, and lives in Riverside County I think.

 

[blades]

Pilkingtons is your best bet.