Finnfire ejector wire.

[tankusaz]

Thought I would pass this on. It may be old news to you all, but I had a heck of a time getting one of these ejector wires without ordering the whole Magazine Guide Assembly, $108 from Brownell's or Beretta. Berreta wouldn't even talk to me, everything goes thru Brownell's. I got the Sako part # off an old post here at BRC and the Tech Rep at Brownell's cross refed it with their part number 913-400-015. $15 and change. Thanks for a great forum, Steve

 

[tim]

It's been a while since I've owned one but if you have access to an unbroken one, a hobby shop, and a small set of flatnose pliers you can get a lenght of music wire a bit larger and bend up a couple copy's in about 10 minutes.

 

[deadwooddick]

Good news…

but Brownell's, as of 9 December… is Out of Stock (with no idea when they will have 'em on the shelf).

Each is $9.41 per.

Fingers crossed they get 'em in before Armageddon !

 

[tankusaz]

Finnfire ejector wire

I broke mine about 9 yrs. ago and don't have the broken pieces. I heard the music wire makes a better replacement. I will make a couple extra when my new one comes and put one in and keep the factory one. Brownell's said they had stock and they were shipping yesterday afternoon or today. Now you got me worried. Will give them a call and check status. Appreciate the replies, Steve