Drawings for a Stolle Teddy

Drawing

Butch,
I am having a new barrel put on my Teddy (from 6ppc to 30BR). I have had the bolt open and have the old 6ppc barrel. I came up with 1.060" on diameter at threads and 1.4465" at the face. I just wanted to know how close I was with my readings.
Fla mac
 
The 1.060 is correct. I'm not sure what you mean about the face. I have prints of the barrel tenon. You can buy tenon prints from the Newlon die blank company.
Butch
 
I just looked up the headspace dimension I had written down for the one Teddy I have rebarreled...1.339"
 
Stolle Teddy

Hal D.,
Thank you, Read my mic wrong. I got 1.347" tenon length. I think I need to check the cal on my mic.
john
 
Tenon length and receiver face to the boltface is 1.340 factory spec.

Check for modifications, wear, etc. for variations on the above dimension.

Greg Walley
Kelbly's Inc.
 
Stolle Teddy

All,
Thank you for your information, I think I need to check my depth mic. I am having a gunsmith do the rebarreling, he did my Hall and it shoots good.
john
 
You must log in or register to reply here.
Back
Top