P
Paul Fielder
Guest
My Dad picked up a really clean but older remmy 1100. He shoots it very well and has a failure to feed issue. The front of the round is BARELY getting hung up on the lip of the bbl/chamber. (bolt only goes about 1" from most rearward position)
It appears to me the carrier in the trigger assembly is not lifting the round up high enough. All you have to do is push the carrier with a bit of force and it chambers just fine.
I have never taked the trigger assembly apart. Is there a certain spring you smiths recommend I replace or is a whold new trigger assembly in order. I looked at the schematic from Brownells but not sure where to start.
Any help would be appreciated.
thanks!!
pf
<><
It appears to me the carrier in the trigger assembly is not lifting the round up high enough. All you have to do is push the carrier with a bit of force and it chambers just fine.
I have never taked the trigger assembly apart. Is there a certain spring you smiths recommend I replace or is a whold new trigger assembly in order. I looked at the schematic from Brownells but not sure where to start.
Any help would be appreciated.
thanks!!
pf
<><