G
garrisone
Guest
Who is makeing or where can one get an adjustable trigger for CZ-452.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
E
Escbowhunt
Guest
There is none. Best you can do is get a adjustable sear from Rimfire Technologies then get a spring kit from yodave. I have got down to 3oz. with this combo.
http://www.google.com/url?q=http://...hgIwAA&usg=AFQjCNHnjeLSAQSusojUCv7JoaDgy3DCSw
http://www.google.com/url?q=http://...hgIwAA&usg=AFQjCNHnjeLSAQSusojUCv7JoaDgy3DCSw
A
alan k
Guest
Rifle Basix makes one. It was far from "drop in" as my 452 had one of the pins staked in and had to be drilled out. Others have not had this problem. Still some creep but adjustable. Not worth the trouble and price. Buy the kit from any one but Eric Brooks.
Al Kunard
Al Kunard
Joe Entrekin
New member
I believe Timney makes a trigger for that rifle, but it requires some wood removal for clearance in the inletting. I bought a used one with the Brooks kit, but it had been set up too touchy for my tastes. Replaced it with the Rifle Basix & it is OK for general use now, but still pretty light. Look on RFC & you will find more info on this issue than you want to read. There seems to be a number of ways to skin this cat.