M
MIT
Guest
After taking to Dave kiff on the problem I thought I had with the reamer being undersized at the throat because of unusual marks on the bullet. He measure the reamers and the finish reamer measured .3385 and the throater .3387. all OK, and suggested I run the reamer in again, I did and it seamed to clean up the seconded time in, so all is well .
I would like to thank everyone that shared their comments to this post and especially to Dave Kiff at PTG for taking his time to call me and taking a personal intrust in resolving the problem, Hats off to you Dave...
Thanks Again,
I would like to thank everyone that shared their comments to this post and especially to Dave Kiff at PTG for taking his time to call me and taking a personal intrust in resolving the problem, Hats off to you Dave...
Thanks Again,