I have a good friend that wants me to chamber his new barrel in 30Br for his savage comp action. he wants to keep the barrel nut but i am not so sure we should? The barrel he bought is a Brux HV. I haven't ever messed with a sarge so i am doing a little homework before i do this job for him. Of course i am not charging my friend any money for this job, but i do want to give him the best job i can possibly provide. Here are some questions i have.
- Can i turn this 1.250 HV barrel down for the nut, or are we already heading in the wrong direction? I would prefer to chamber this barrel like any other normal barrel, and do away with the nut.
- What diameter do i turn the shank to?
- What thread pitch are we dealing with?
- I am assuming the tenon length will be the measurement from the action face to the bolt face? Minus a little clearance." depending how we do this barrel" If we do a barrel nut i can measure his 6Br barrel he already has for this action.
- Any other suggestions, or ideas i should know before we do this thing? I dont have an action to study or measure until the day of the job. I wish i had one here. I have no doubt i can do this and it properly, i just like to know what i am doing before i attempt it. thanks Lee
- Can i turn this 1.250 HV barrel down for the nut, or are we already heading in the wrong direction? I would prefer to chamber this barrel like any other normal barrel, and do away with the nut.
- What diameter do i turn the shank to?
- What thread pitch are we dealing with?
- I am assuming the tenon length will be the measurement from the action face to the bolt face? Minus a little clearance." depending how we do this barrel" If we do a barrel nut i can measure his 6Br barrel he already has for this action.
- Any other suggestions, or ideas i should know before we do this thing? I dont have an action to study or measure until the day of the job. I wish i had one here. I have no doubt i can do this and it properly, i just like to know what i am doing before i attempt it. thanks Lee