bedding

K

kasjaka

Guest
which bedding compound and pillar kit is most user friendly
for original wood stock 40x?
 
I haven't used it yet, but I read on another post that Devcon's Plastic Steel Paste is a sound choice. I am also going to look into a few Marine products as they are thought to be least affected by weather ( got that one from a high-power post). Hope this helps a bit, tim
 
Thanks for the link Fred. I printed that info, and will use it on my Savage. t.
 
Anybody know how?

On this subject does anybody know how Richard Franklin achieves such a neat straight line finish to the bedding at the front of the bedding? If the barrel and action is only supported by tape near the Forend and at the rear by the original stock what stops the bedding mud from just being pushed forward with an irregular finish at the front? Any help would be appreciated

Cheers
Allan
 
I don't know what he does, but I used to lay tape in the stock channel exactly where I wanted to trim the bedding to, then build up a matching ring on the barrel or action. I'd end up with only a shaving of bedding that I could trim off with a box knife.
 
You must log in or register to reply here.
Back
Top