Bat SV extractors for PPC

[JRB]

I an having trouble with my Bat SV dropping the ppc case on extraction, unless it is real fast
i have a 308 bolt face and right bolt, left load, right eject, dual port,
Can some one make a suggestion as to what is needed to get this working.
Thanks
Jim

 

[Dusty Stevens]

You may want to call bat. They have a special extractor for the br/ppc boltface i think. Ive seen a bunch work real well. Not sure what the difference is in the br and br/ppc bolt

 

[JRB]

You may want to call bat. They have a special extractor for the br/ppc boltface i think. Ive seen a bunch work real well. Not sure what the difference is in the br and br/ppc bolt

Thanks for the tip,
I will send them an email, my action is an older one, so there could be some changes for sure.
Jim

 

[Joe McNeill]

I just bought a sliding extractor from Bat for my S action, serial #74. It is used on a 6 Dasher and I wanted to extract
6 PPC brass. Depending on what extractor you currently have, sliding or fixed will determine which replacement kit they
will recommend.
Regards,

Joe McNeill
SW Arkansas